Hanger bell type electrical heating AI-Alloy T4 treating furnace
- Special specifications square (A)/round (B)
‧ The furnace structure is made of SS400 structural steel, and the insulation layer inside the furnace is made of refractory bricks, insulation bricks and other insulation materials.
‧ The heating wire uses a Swedish-made heating wire, which is processed into a wavy shape and fixed on the inner edge of the furnace wall.
‧ Equipped with a hot air circulation device to quickly equalize the temperature in the furnace, and the thermal circulation blade seat is protected by air cooling to prevent the bearing from overheating and oil loss. (No need to configure cooling circulating water)
‧ Single zone independent temperature control, upper and lower power output and automatic PID calculation with the temperature control meter.
‧ The temperature detection method can detect temperature in multiple channels, and the number of detection points can be increased or decreased according to customer needs.
‧ The electronic control system can be integrated with a recorder and human-machine interface, and has control systems such as over-temperature, furnace door, and trolley protection.
‧ Customized equipment can be designed according to customer specifications.
Our company produces aluminum alloy heat treatment equipment, integrating many customer experiences and mature manufacturing technology, and produces products that meet industry requirements:
1. Good temperature uniformity
Comply with AMS2750 and CQI-9 specifications. Temperature uniformity up to 3℃
2. The quenching time of the solid solution furnace is short
The time from the furnace door opening to the completion of quenching is <10 sec.
3. Easy to operate
Temperature setting adopts universal interface, with high degree of automation, making it easy for operators to get started.
4. Comply with energy conservation and carbon reduction
It adopts lightweight heating chamber design and heats up quickly.
5. The heating source is customized according to customer needs.
In addition to general resistance heating, gas combustion heat source heating can also be used. The unique gas heating method reduces gas consumption and is stable.
6. Customized equipment can be designed according to customer specifications.
Bicycle Parts Industry
Lightweighting is one of the factors in the development of bicycle parts, so aluminum alloy parts account for a huge proportion.
Yibai Precision Co., Ltd.’s aluminum alloy heating and heat treatment equipment can comply with AMS2750E specifications.
It has been widely used in bicycle parts manufacturing industry, and we can provide better equipment for your reference.
SPECIFICATIONS | ||||
| Model | Cruciblespace | Working space | Power | Max. temp |
YB-11001A-090909 | L1050 x W1050 x H1600 mm | L900 x W900 x H900 mm | 120Kw | 650°C |
YB-11001A-121212 | L1350 x W1350 x H1900 mm | L1200 x W1200 x H1200 mm | 150Kw | 650°C |
YB-11001A-151515 | L1650 x W1650 x H2200 mm | L1500 x W1500 x H1500 mm | 170Kw | 650°C |
* Tailor made at customer' request
SPECIFICATIONS | ||||
| Model | Crucible space | Working space | Power | Max. temp |
YB-11001B-0912 | Φ1050 x H1900 mm | Φ900 x H1200 mm | 110Kw | 650°C |
YB-11001B-1015 | Φ1200 x H2200 mm | Φ1050 x H1500 mm | 130Kw | 650°C |
YB-11001B-1218 | Φ1350 x H2500 mm | Φ1200 x H1800 mm | 160Kw | 650°C |
* Tailor made at customer' request
Recommend
Car bottom type electrical heating AI-Alloy T6 aging treating furnace